How To Repair Grandfather Clock. 1) examine the dial on the grandfather clock and check to make sure the hands are not touching or hanging on any parts of the dial or second hand. Examine and see if the weights are aligned properly.

HOW A GRANDFATHER CLOCK WORKS AND REPAIR YouTube
HOW A GRANDFATHER CLOCK WORKS AND REPAIR YouTube from www.youtube.com

If you do, they will not be easy to put back. Movement strip down, clean and lubrication. Complete movement & face replacement \ transplant.

When you take the weights off, do not knock them together as this could knock out some of the bypasses on the.

A howard miller clock has various mechanisms within the clock that may need to be repaired if the clock is an antique, or the clock may just need an adjustment in general. The tip end of a gear will penetrate the hole. Weights control the grandfather clock movements.

And if you lose one, it is nearly impossible to find a replacement.

Grandfather clocks are actually very durable. To slow the grandfather clock down, move the pendulum disk down by turning the adjustment nut to the left. A professional watch and clock repair can diagnose most grandfather clock issues;

Ad fast, easy & affordable.

The hour hand only can be moved forwards or backwards without any problem. A clock minute hand that touches the glass will stop your clock. Sign up for our free course!

Try to fix the weights.

Serving minneapolis, st paul, st cloud, brainerd, rochester and all communities in between. Be careful when you lift the weights off not to pull any of the gears out of line. Ad fast, easy & affordable.

When it comes to grandfather clock service or repairs, we come to your home or office with our complete mobile clock shop.

Make sure the hands on the clock are not touching each other or touching the face of the clock. If the clock is striking the wrong hour, you can simply rotate the hour hand in either direction to the correct hour the clock is chiming. Sometimes the clock mechanisms become damaged upon moving the clock, or there may need to be an adjustment made on a faulty piece.